|
Post by nicholas on Feb 25, 2023 8:35:28 GMT -7
I'm always messing around with this stuff. I finally stumbled on the missing link. The musicomlab parallelizer . It has three separate loops in parallel. You set each effect to 100% wet (or killdry) and insert it into a loop. The effect in each loop gets the dry signal so this eliminates all the issues of running multiple effects 100% wet in series. The level of each effect is mixed in with the knob and can be toggled on/off with a no click silent footswitch. It passes the dry signal all the way through at 100%. The footswitch for the dry level activates the dry knob which can be set to any level between off and 100%. Very well thought out. So you can have your normal dry come throuht in stereo and add in effects mixed with it, or shut off the dry entirely and only have the effects come out of the wet amp which sounds so cool. This thing is the puzzle piece I've been missing. I wish I found out about this long ago. It seems really well made. Super happy with it. If anyone out there has been messing around with wet / dry setups , this thing is a gamechanger. Right now I'm running my H9 harmonizer in FX1, a delay in FX2, and reverb in FX3. It's so nice being able to use multiple effects at the same time all set to full wet. Before this I was pretty much limited to one effect in wet only, and then of course you're then limited to wet only routing. Now I can use three effects and fully adjust the dry level or eliminate it with no weirdness or volume jumps. It sounds so good and is so simple. Finally my wet / dry setup actually sounds professional and bug free!
|
|
|
Post by GuitarZ on Feb 25, 2023 8:42:47 GMT -7
Cool concept. My first thought was this is how I mix and add effects when recording. Makes sense for live.
|
|