robv
New Member
Posts: 5
|
Post by robv on Sept 17, 2020 5:11:54 GMT -7
Sadly my EZG-50 has suffered some physical damage to the standby switch. It still works, but the toggle is now loose under the finger and I don't know how long it will last. Does anyone have the specs I would need to replace it (I'm sure I could do that myself) - just so as I buy the correct replacement.
I am in the UK. Many thanks Rob
|
|
|
Post by Ridgeback on Sept 17, 2020 5:28:51 GMT -7
I'm almost certain that if you contact the Z-Repair folks (link at top of page), they will provide you with the correct specs. Good luck.
|
|
|
Post by DRZ on Sept 17, 2020 10:32:29 GMT -7
The Power as well as the Stand-By switch is : A Carling P/N 110-63, which is a SPST 6A switch same one used on all Fender Vintage Amps . The Amplifed Parts part number is P-H495.
Z
|
|
robv
New Member
Posts: 5
|
Post by robv on Sept 18, 2020 1:16:02 GMT -7
Thank you for your reply, much appreciated. The EZG-50 is a mighty fine amp (and I do mean MIGHTY). It's a powerhouse. Rob
|
|
|
Post by jlc on Nov 1, 2020 8:57:58 GMT -7
The Power as well as the Stand-By switch is : A Carling P/N 110-63, which is a SPST 6A switch same one used on all Fender Vintage Amps . The Amplifed Parts part number is P-H495. Z Doctor, your the man.
|
|