|
Post by dietcoke212 on Jul 21, 2020 21:24:13 GMT -7
First off, I absolutely love my Z Wreck jr, tied for the best best amp I've ever owned.(I have a Maz 18 alsoš)
But my question is; as far as the treble/bass eq knobs go, what setting is "zero"? (Not adding or subtracting frequency)
Thanks for the input all!
|
|
|
Post by Chilly Gibbons (Todd T.) on Jul 22, 2020 3:31:42 GMT -7
Hi and welcome to the forum. The eq on most amps is purely subtractive, so all eq knobs on 10 is as close to the original signal as possible. Docās eq bypass/boost foot switch makes it possible to eliminate the tone stack altogether by engaging the switch and maxing the bypass knob on the foot switch.
|
|
|
Post by doctorice on Jul 22, 2020 4:47:09 GMT -7
I don't own a ZW Jr, but I do have its big brother. The eq knobs seem, to me, to operate somewhat differently than on the MAZ series. Try turning the tone knobs on the ZW completely counter-clockwise. Play your guitar. Then start bringing them up one at a time. Somewhere along the way, you likely will find a balancing out of the frequencies and hear the amount of mids changing as you adjust. (Cut setting obviously has a big effect too.)
|
|
|
Post by helmi on Jul 22, 2020 14:55:17 GMT -7
Welcome to the forum.
|
|