|
Post by Patrick B on Jun 12, 2020 11:07:25 GMT -7
I have a few Dr. Z 1x12 and 2x10 cabinets that simply for aesthetics I would like to switch from the black protective corners to the chrome ones. All but one of my cabs has black but I have a blonde that has the chrome. I'd be happy to buy these from Dr. Z so does anybody know if they are available and if they aren't available from Dr. Z does anybody know a source for these that would be exact matches for the black corners and the holes already drilled in my cabs?
|
|
|
Post by Mark (Basement Enthusiast) on Jun 12, 2020 11:30:59 GMT -7
I'm guessing either the chrome or black "2 Hole Cutout Corners" here: www.mojotone.com/Corners_x#/The keys for matching the right corners on Dr. Z's cabinets are: - the black ones are matte, not shiny - they're the "2-hole" kind (meaning they only screw into the side & top, not the front for instance) - they're also not the "with lip" kind that Fender uses (Fender ones grab onto an inside corner, Doc's don't)
|
|
|
Post by Patrick B on Jun 12, 2020 11:37:11 GMT -7
I'm guessing either the chrome or black "2 Hole Cutout Corners" here: www.mojotone.com/Corners_x#/The keys for matching the right corners on Dr. Z's cabinets are: - the black ones are matte, not shiny - they're the "2-hole" kind (meaning they only screw into the side & top, not the front for instance) - they're also not the "with lip" kind that Fender uses (Fender ones grab onto an inside corner, Doc's don't) Awesome, thanks!
|
|
|
Post by zpilot on Jun 12, 2020 14:07:45 GMT -7
Also make sure that they are not for countersink screws. They need to be for panhead screws. Corners for countersink screws have to have a relieved area in the wood for the countersink.
|
|
|
Post by goodez on Jun 12, 2020 19:20:48 GMT -7
I have a set that came off of my z28 head. You can have them. Just message me.
|
|
|
Post by Patrick B on Jun 13, 2020 7:32:58 GMT -7
I have a set that came off of my z28 head. You can have them. Just message me. That's so generous and appreciated! Thanks! I'll send message.
|
|