captain38
Full Member
I followed you big river...
Posts: 198
|
Post by captain38 on Mar 19, 2007 12:49:58 GMT -7
I see that there is a zbest on ebay and it is 4 ohm. How is this possible with the v30 g12h combo?...I would like to get a 4 ohm cab so that i could run a Y cable in order to have my internal speakers and an external cab.
|
|
|
Post by Paul (TRANE) on Mar 19, 2007 13:31:35 GMT -7
Basically, it would be 2 - 8 ohm speakers wired in parallel to achieve a 4 ohm load.
Paul G.
|
|
captain38
Full Member
I followed you big river...
Posts: 198
|
Post by captain38 on Mar 19, 2007 14:08:42 GMT -7
So essentially any "stock" zbest could be wired to 4 ohms?
|
|
|
Post by dongiesen on Mar 19, 2007 19:17:33 GMT -7
Guessing it was either ordered that way or was swapped by the seller as I believe they typically come V30 & G12H30 both being 16 ohms in parallel to total a 8 ohm cab. Could be wrong?
|
|
|
Post by division17 on Mar 20, 2007 5:48:35 GMT -7
You are correct sir.
|
|
|
Post by BW on Mar 20, 2007 6:35:20 GMT -7
There are more than a few stock 4 ohm Zbest cabs out there and will be marked '4 ohms' on the back by the input jack.
|
|
captain38
Full Member
I followed you big river...
Posts: 198
|
Post by captain38 on Mar 20, 2007 13:55:53 GMT -7
Thanks alot fellas!!! I guess someone just misinformed me earlier...saying that I would have to change speakers in a zbest in order to run it at 4 ohms. thanks!!!
|
|