|
Post by Strato on Feb 25, 2007 23:00:03 GMT -7
I have a Maz 18 nr head, a Zbest cab, and ebay permitting, a 3/4 open back mesa cab. Both the Zbest and the mesa are 8 ohm cabs. So...
1) Could i use both of them with the 4 ohm output on my maz? & 2) If so, what should i use to split the output?
Thanks! ;D
|
|
|
Post by benttop (Steve) on Feb 25, 2007 23:14:40 GMT -7
Yes, you can do that. Does the Mesa cab have only one jack? A lot of cabs have paralleled jacks that let you daisy chain cabs. If not, you'll need a Y cord made for this. You can see one here: www.greatcables.us/ - click on Guitar Cables and scroll down to the bottom.
|
|
|
Post by Strato on Feb 26, 2007 8:35:45 GMT -7
|
|
|
Post by yinielin on Feb 26, 2007 14:47:21 GMT -7
What if u have 2, 2 12 cabinets rated at 4 apeice. Can your run them at 8 somehow and use both?
|
|
|
Post by benttop (Steve) on Feb 26, 2007 15:04:26 GMT -7
What if u have 2, 2 12 cabinets rated at 4 apeice. Can your run them at 8 somehow and use both? If you have two 4 ohm cabs, you can run them in series to get 8 ohms. You would need a special adapter for this as well - the link I gave above has one but I can't find it just now.
|
|
|
Post by beej on Feb 26, 2007 21:26:00 GMT -7
you can get a "Y" cord in either parallel or series configuration at "http://procablesnsound.com/" - i have one of each and they work great
|
|
|
Post by Shannon on Feb 26, 2007 22:11:03 GMT -7
you can get a "Y" cord in either parallel or series configuration at " procablesnsound.com/" - i have one of each and they work great I do too. Todd makes great cables and will work with you to get just what you need. He even made sure I had better tone than Jason, and all I had to do was ask.
|
|
|
Post by yinielin on Mar 1, 2007 12:18:50 GMT -7
I cant find it either but thats exactly what I need. Have a fender deville open back loaded with alnico blue/silver and the zbest with g12h g12m would love to see how they sound together.
|
|