RedWire75
New Member
the underground is overcrowded
Posts: 37
|
Post by RedWire75 on Apr 14, 2006 9:28:54 GMT -7
Does anyone know where I can find a wiring diagram for 4-way tele switching (B, N+B parallel, N, N+B series) with the tone control on the bridge pickup only? There's got to be something out there right?
Or if it's a simple modification to go from the standard 4 way diagrams to take the tone off the neck can someone explain it so a dunce can understand?
Thanks!!!
|
|
|
Post by rcrecelius on Apr 14, 2006 10:53:33 GMT -7
In a std configuration, there is a wire running from the tone control to the volume pot...remove that wire from the volume pot and put it on the same terminal as the hot from the bridge pickup...on the switch that is. Make sense?
|
|
dave
New Member
Posts: 7
|
Post by dave on Apr 14, 2006 11:06:05 GMT -7
I'm looking at the wiring diagram for the 4-way telecaster configuration at www.acmeguitarworks.com/webpage.aspx?webpage_id=8Thats right, disconnect the wire between the tone pot from the volume pot and reconnect it linking the tone pot to the top left tag of the 5-way (where the bridge pickup first comes in). The tone then operates only on the bridge pickup.
|
|
RedWire75
New Member
the underground is overcrowded
Posts: 37
|
Post by RedWire75 on Apr 14, 2006 11:20:49 GMT -7
Got it.... Thanks a lot!! I'm off to melt some solder....
|
|
|
Post by Curt on Apr 14, 2006 20:38:42 GMT -7
All I have to ad here is this is a GREAT mod for Tele.
|
|