greg
New Member
Posts: 1
|
Post by greg on Dec 1, 2008 4:22:39 GMT -7
hello, i recently bought a used maz 38 watt invasion 2 12 combo. the amp works fine and sounds great except for the reverb. it is just not very "wet" sounding and is not very audible. for example with the reverb control all the way up, it sounds like my fender twin with the reverb set on about 2. what could be the cause of this? any info would be much appreciated. thanks, gregg
|
|
|
Post by Lefty on Dec 1, 2008 7:13:11 GMT -7
You could try a new reverb tank. They are very delicate and there could be a problem with the one you have.
|
|
|
Post by bluzsteel on Dec 1, 2008 7:40:07 GMT -7
try your reverb tubes 1st , if that doesn't fix it take out your pan and inspect it . Ive seen a spring come loose that will give that effect as well. sometimes the output transducer will go bad on the pan ...or the little wires that got to the Transducers will come off
|
|