|
Post by drew on Nov 16, 2008 11:45:20 GMT -7
I believe that the Dr Z 10's come in 16 ohm only and the Dr Z 4x10 cab is wired to 4 ohms. Is that correct? I'd like to run a 4x10 cab with my Galaxie. The 4x10 is wired for 4 ohms. As I think about options the likely scenario would be to add an additional speaker connector and run 2 8 ohm outs, (2 10's in parallel each output) and run both Galaxie output jacks. Am I missing an alternate scenario? Other than running the cab at 16 ohms.
Thanks, Drew
|
|
|
Post by T-R☼CK ♫ on Nov 16, 2008 11:49:50 GMT -7
Weber Z-Matcher...$100 + ship....I'm gettin' me 1 just so I can use ALL my cabs with the Galaxie...
|
|