olrs
New Member
Delta 88 x 4
Posts: 45
|
Post by olrs on Jun 10, 2008 12:30:35 GMT -7
Hey folks, I just picked up a matching Z-Best 2x12 for my Delta 88 at a local music shop. It sounds great! They've got a second matching cab and I'm curious about running both 2x12s off the 88. Neither cab has parallel inputs, nor does the head have parallel outs. I assume I'll need to mod one cab or the head to do this but I was wondering if any of you folks have any clever suggestions for me.
I know that the first thing you're probably all thinking is: "Good lord, why do you need 2 cabs, it's already plenty loud". All I can say to that is, It can never be too loud! Long live rock and roll!
|
|
|
Post by T-R☼CK ♫ on Jun 10, 2008 12:36:07 GMT -7
Todd (PCNS) has "Y" adapters that will get you where you want to go very nicely...
|
|
|
Post by kruzty on Jun 10, 2008 12:44:52 GMT -7
Yep, the Y cable is the way to go. What impedance is your current Z Best? You'll want to make sure the next one you get has the same. Also, if it is 4 ohms, you'll need a series adapater (for 8 ohm total) because the head can't support 2 ohms.
|
|
olrs
New Member
Delta 88 x 4
Posts: 45
|
Post by olrs on Jun 10, 2008 13:58:03 GMT -7
|
|
|
Post by LeftyLang on Jun 10, 2008 20:14:33 GMT -7
|
|