|
Post by funkyjazz82 on Feb 2, 2007 7:33:44 GMT -7
Ok so im practicing with the band, and then all of a sudden i hit my wah pedal and boom, no sound. Thinking its my pedal board or cords, i quickly check to see if its my Z. I plug the cord straight in from my guitar to the amp and no sound. Im baffled because its brand new. I look in the back to see if theres anything wrong, and i see something i hadnt seen before, and its a cord hanging down that looks like it could be plugged into something, its got the two incisions, anyway, im thinking it could have been disconnected, but i couldnt find the plug to plug it back in. could this be my problem? the light is red so the amp works itself, but theres no sound and im afraid ive disconnected the speaker. it also got a little wet from the rain when i brought it in, but i doubt that could be the problem, can anyone help me or give me an input? thanks
By the way, this is a reverb 1x12 combo, it just basically quit on me while i was playing, it was also leaning back against a wooden column, so im thinking this cord just came undone from the speaker, so the question is, where do i plug it back in??
|
|
|
Post by Lefty on Feb 2, 2007 7:49:02 GMT -7
It kinda sounds like the speaker cable came unplugged from the speaker. There are two terminals on the speaker, one neg-one pos. If I recall right, Doc uses black and white for his speaker cables. The black one is the negative and the white is the positive. If you look at the speaker terminals they should be marked with a + or a - on them. If you have a camera, take a pic and either post it or send it to me and I can tell you more.
|
|