|
Post by John H on Oct 24, 2023 7:13:20 GMT -7
Hello everyone. I'm converting one of my Remedys to a combo, so I need an inverted panel. Doc never released a Remedy combo, so it's safe to assume there were never any made. That said, I need some recommendations on where to order custom panels. Aluminum or plexiglass is fine. I have seen recommendations for Sandy at Precision Design, but with no response to email or phone, and a website that seemingly hasn't been updated in 16 years, I suspect that she is no longer in business.
Thank you in advance!
|
|
|
Post by purpletele on Oct 24, 2023 7:16:54 GMT -7
Hello everyone. I'm converting one of my Remedys to a combo, so I need an inverted panel. Doc never released a Remedy combo, so it's safe to assume there were never any made. That said, I need some recommendations on where to order custom panels. Aluminum or plexiglass is fine. I have seen recommendations for Sandy at Precision Design, but with no response to email or phone, and a website that seemingly hasn't been updated in 16 years, I suspect that she is no longer in business.
Thank you in advance!
I have Sandy's email at Simplifysandy@aol.com If that doesn't work, then she might be retired. Mojotone should be able to help.
|
|
|
Post by John H on Oct 24, 2023 7:23:14 GMT -7
If that doesn't work, then she might be retired. Mojotone should be able to help. Thank you, sir. I have tried that email, twice actually, and have not received a response. Also, I spread my emails out over the course of a few weeks, just to rule out the possibility that she was on vacation or something. But again, with no response to phone and no updates on the website, it's probably safe to assume she has retired.
But anyway, I will give Mojotone another try.. I tried a while back but their ordering process seemed to be rather involved.
Thanks again!
|
|
|
Post by John H on Oct 24, 2023 8:18:06 GMT -7
Disregard! Sandy called me just a few minutes ago and she's still in business and doing well! She's also a delight to chat with, and incredibly knowledgeable.
|
|
|
Post by scottyc13 on Oct 24, 2023 9:00:14 GMT -7
I’ve used Sandy twice. Excellent work. She did the panel on the amp in my avatar.
|
|
|
Post by mrcapers on Oct 24, 2023 12:49:45 GMT -7
Hello everyone. I'm converting one of my Remedys to a combo, so I need an inverted panel. Doc never released a Remedy combo, so it's safe to assume there were never any made. That said, I need some recommendations on where to order custom panels. Aluminum or plexiglass is fine. I have seen recommendations for Sandy at Precision Design, but with no response to email or phone, and a website that seemingly hasn't been updated in 16 years, I suspect that she is no longer in business.
Thank you in advance!
Hi John, I put my Remedy in a studio combo, with the panel upside down. Sounded good, but I got a fair amount of tube rattle. Maybe you'll be lucky, but it's probably one reason Doc never made a Remedy combo.
|
|
|
Post by John H on Oct 24, 2023 12:54:46 GMT -7
Hi John, I put my Remedy in a studio combo, with the panel upside down. Sounded good, but I got a fair amount of tube rattle. Maybe you'll be lucky, but it's probably one reason Doc never made a Remedy combo. Thank you, sir! I was actually wondering about that, but figured if it happens I will just isolate the tube sockets. I don't really play it loud anyway.. It's just a clean pedal platform so I'm thinking it'll be ok.
|
|
|
Post by purpletele on Oct 24, 2023 15:36:03 GMT -7
Disregard! Sandy called me just a few minutes ago and she's still in business and doing well! She's also a delight to chat with, and incredibly knowledgeable. That is awesome, helmi would appreciate the fact that she called you. I had a bit of a learning curve of software to get my documents to sync with hers. She had me trained a few years back, but I am not anticipating building anything new soon. Let us know how it goes. If you get in a software pinch let me know and I'll figure out what I had used. Brian V
|
|