garys
New Member
Posts: 4
|
Post by garys on Dec 8, 2021 17:44:08 GMT -7
Hello new member and user here. I recently purchased a 2011 I believe it is Maz 18 Jr 210 combo with reverb I took the jj"s out and replaced them with reflector series 6p14p tubes and it sounds great... Can anyone give me the proper Mod reverb tank replacement # for this 210 combo please? Also I am getting a static sound that seems to come from the master volume pot and only between say 9 and 3 o'clock, it's not loud bur is constant in that range, any ideas?
Thanks! Gary
|
|
|
Post by purpletele on Dec 8, 2021 17:55:51 GMT -7
Hello new member and user here. I recently purchased a 2011 I believe it is Maz 18 Jr 210 combo with reverb I took the jj"s out and replaced them with reflector series 6p14p tubes and it sounds great... Can anyone give me the proper Mod reverb tank replacement # for this 210 combo please? Also I am getting a static sound that seems to come from the master volume pot and only between say 9 and 3 o'clock, it's not loud bur is constant in that range, any ideas? Thanks! Gary Hi, I would spray Deoxit on the MV POT, I just cleared a scratchy pot the other day on my Z-Plus. That is not unusual for a POT to become scratchy. As far as the Reverb Tank, someone will chime in and provide the model. You could do a search on the forum and find it from a previous thread. I think we discuss the reverb tank model every 3-4 months. Congrats on the amp! Welcome to the club
|
|
|
Post by Jaguarguy (Mike) on Dec 8, 2021 17:58:58 GMT -7
|
|
garys
New Member
Posts: 4
|
Post by garys on Dec 8, 2021 19:07:33 GMT -7
Thanks! It's not behaving like a normal scratchy pot, it's a very faint constant almost white noise sound sound and is not audible say on a scale of 1-10 say between 1-3 and 7-10 and only the master volume affects it. I am going to try and clean it though just in case... That was the number I came up with for the reverb just seen some conflicting numbers. Thanks again! Gary
|
|
|
Post by purpletele on Dec 9, 2021 10:21:50 GMT -7
Thanks! It's not behaving like a normal scratchy pot, it's a very faint constant almost white noise sound sound and is not audible say on a scale of 1-10 say between 1-3 and 7-10 and only the master volume affects it. I am going to try and clean it though just in case... That was the number I came up with for the reverb just seen some conflicting numbers. Thanks again! Gary While you are spraying that pot, you may want to clean and scrub the Send and Receive jacks on the FX Loop. I don't anticipate that action to resolve your MV issue, but when those jacks become oxidized they do weird things to the performance. You may want to send an email to Don in Repairs for further advice. BV
|
|
|
Post by digs57 on Dec 11, 2021 7:51:57 GMT -7
Mod II will give you reverb this amp deserves
|
|
|
Post by adam on Dec 11, 2021 9:17:25 GMT -7
garys Congrats, take a look at the Z maintenance video. Pretty simple and fun. Sound like maybe what you are hearing is addressed in this video.
|
|
garys
New Member
Posts: 4
|
Post by garys on Dec 11, 2021 19:52:21 GMT -7
garys Congrats, take a look at the Z maintenance video. Pretty simple and fun. Sound like maybe what you are hearing is addressed in this video. Thank you! I also found my V2 tube was bad last night, I had a spare but I ordered a whole new set of tubes from the Tube Store (already had replaced the JJ's) they should be here midweek. I will go over the amp once all my parts come in, really like it though...
|
|