mazman
Full Member
www.crossroadsband.info
Posts: 176
|
Post by mazman on Mar 15, 2021 10:41:25 GMT -7
Who does service. I got a cpl old pedals that either don’t work or noisy
|
|
|
Post by "Z" Steve on Mar 15, 2021 12:28:57 GMT -7
Who does service. I got a cpl old pedals that either don’t work or noisy re the noise maybe try a little DeOxit on the pots and in & put jacks - it's worth a try!
|
|
|
Post by zpilot on Mar 16, 2021 0:08:58 GMT -7
AnalogMan. Their bench/hourly fee is $40 which is not bad but might wind up being more than a pedal is worth with shipping both ways. Usually what fails on a pedal is the switch and any decent tech can repair that.
|
|
|
Post by "Z" Steve on Mar 16, 2021 7:52:03 GMT -7
Oddly enough I was rearranging my pedal board last night (due to a TPS re "Do You Have Too Much Gear"), so as I was testing everything after the rebuild, my original Timmy was making a popping sound when I pressed the switch. In this instance the DeOxit worked like a champ! The same with that squeaky EB volume pedal.
|
|