|
Post by texjam on Jun 16, 2015 7:02:53 GMT -7
I'm starting with a new 12AT7. Did work intermittently when I first got the amp. Any other advice?
Thanks, JAM
|
|
|
Post by headshrinker (Marc) on Jun 16, 2015 7:31:54 GMT -7
The 12AX7 in V4 is also part of the reverb circuit. Make sure the rca plugs to the amp and pan are seated well. I'd pull them and clean them with deoxit or something similar. If you have another amp with a reverb pan you can see if the problem is the pan by hooking it up to the amp. Usually you can put the amps back to back and make the cables reach without removing it. It may not be the right pan for the Maz, and may not sound the same, but it won't hurt anything. If it works with it, you know it's the Maz's pan.
|
|
|
Post by texjam on Jun 16, 2015 7:43:50 GMT -7
10 4 thanks just replaced one in a blues jr
|
|
|
Post by texjam on Jun 17, 2015 8:57:28 GMT -7
No luck. May be the tank. Going to try another tank tomorrow.
|
|
|
Post by texjam on Jun 18, 2015 11:51:07 GMT -7
Broken tank
|
|
|
Post by BritInvasion on Jun 18, 2015 13:19:20 GMT -7
Glad you got it figured out. At least the tanks are fairly cheap.
|
|