|
Post by digs57 on Apr 22, 2014 9:07:44 GMT -7
Probabaly beating dead horse here...just wondering if doing the aluminum trick helps.Covering bottem and alu the cardboard.
Theres some great previous posts (thanks eddie,britinvasion) about this... just wondering if that would take to next level to quiet things.
|
|
|
Post by bluzman on Apr 22, 2014 11:01:13 GMT -7
Worked great for me! Make sure it's all connected somehow.
|
|
|
Post by digs57 on Apr 22, 2014 16:52:02 GMT -7
ya man...will do
|
|
|
Post by captainron (Ron) on Jun 29, 2014 8:18:26 GMT -7
Hey Digs57, Is that the Zverb your talking about? If so I need to find that read.
|
|
|
Post by headshrinker (Marc) on Jun 29, 2014 8:45:00 GMT -7
Though it looks cool to have the reverb unit on the head, most guys who are really into outboard tube reverb units put them on the floor or off of the head somewhere. When they are on the head if they end up too close to a transformer they can pick up noise and hum. G. E. Smith who almost always uses an old Fender outboard reverb unit gave me that tip. Also putting the unit on something soft like a cushion will keep you from getting that spring explosion if someone stomps on the stage floor too hard. Isolating with foil will help. If you can get some of the aluminum tape that heating and cooling guys use to wrap duct work it's a lot easier. As said above be sure what you do gets grounded.
|
|
|
Post by digs57 on Jun 30, 2014 17:44:26 GMT -7
No I have combo that I thought about wrappin that rascal...so to speak.
i replaced the driver tube w/nos that some of us are using here and BAM that made a hello difference...forgot all about wrapin dee rascal...
do have some extra aluminum tape just waiting though....
|
|
|
Post by headshrinker (Marc) on Jun 30, 2014 19:18:08 GMT -7
|
|
|
Post by digs57 on Jun 30, 2014 20:35:52 GMT -7
got it brudda... (there edited)
|
|