|
Post by Jason Cornelius on Jun 27, 2007 11:06:19 GMT -7
I know I should know this...but want to make sure I do it right.
I have 2 8 ohm speakers, and I want them to go into the 4 ohm jack on my Maz jr.
each speaker has 4 terminals (2 + and 2-)
What goes where?
Thanks in advance!! Jason
|
|
dave
New Member
Posts: 7
|
Post by dave on Jun 27, 2007 11:24:02 GMT -7
You wire them in parallel to get 4 ohms from two 8 ohm speakers. These means link one output of the jack socket to the + tag on the first speaker, then continue the same connection wire to to the + tag of the second speaker. Do the same for the other output of the jack socket connecting up the -ve tags on each speaker. It doesn't matter which jack terminal goes to the +ve or -ve, just keep the one wire going to both +ve tags and the other to the -ve. Use quality thick stranded wire, thicker the better (within reason)
A diagram speaks a thousand words so they say! Hope this makes sense. Good luck!
|
|
|
Post by benttop (Steve) on Jun 27, 2007 11:30:44 GMT -7
|
|
|
Post by Jason Cornelius on Jun 27, 2007 11:45:18 GMT -7
Thanks guys!
I really appreciate it!!
|
|