|
Post by brayks on Jun 10, 2013 9:31:30 GMT -7
I'm still trying to sort out my Antidote sound "issues"'
I'll be doing some front end tube swapping to see where that leads me but I also want to check the bias on the power tubes.
I checked the website but couldn't find the bias info posted.
does anyone know what the correct bias setting is for this amp? Might it be the same as the Route 66?
Thanks Steve
|
|
|
Post by DRZ on Jun 10, 2013 10:23:26 GMT -7
Try 33mA per tube Steve.
Z
|
|
|
Post by brayks on Jun 10, 2013 17:39:41 GMT -7
Try 33mA per tube Steve. Z Thank you kind sir. They were running 32 and 34mA. I thought I might bump it a little and set the bias to 34 and 37mA to see what I would get. I seem to recall that was at about 447 volts. I was thinking that wouldn't hurt tube life that much and the transformer could handle it. Should I give it a shot or set it back to 32/34mA? BTW, my favorite speaker combo right now is a 2x12 with a Gold and G12-65.......
|
|
|
Post by markT on Jun 10, 2013 18:36:09 GMT -7
Thanks Doc, I was wondering about that too.
Good luck and keep us posted Steve.
|
|
|
Post by pcns on Jun 10, 2013 20:49:09 GMT -7
Maybe you Antidote needs to visit my house for a while Steve?
|
|
|
Post by brayks on Jun 10, 2013 23:09:28 GMT -7
I'm thinkin' some of the local brothers should stop by the "studio" to lend me a hand sorting this baby out......
|
|
|
Post by pcns on Jun 11, 2013 5:02:44 GMT -7
When I get back from Kansas City we'll set something up. My kids are ready for some computer lab time anyway lol
|
|
|
Post by brayks on Jun 11, 2013 5:26:45 GMT -7
When I get back from Kansas City we'll set something up. My kids are ready for some computer lab time anyway lol
|
|