|
Post by robinje on Apr 29, 2007 21:06:44 GMT -7
I am just about set to order a new CG, but I have a question... One of my cabs is a VOX 2x12 with 8-ohm Celestion Blues wired in series for a 16-ohm load. Would I need to rewire this cab in parallel to drop the load to 4 ohms to be able to use it with the CG? I see that the CG has output jacks for 4 and 8 ohms only. My other cab (J. Design 1x12) should be fine as it's loaded with an 8-ohm Eminence Tone Spotter (any opinions on using this speaker?). Thanks!
Jim
|
|
|
Post by kledbet on Apr 29, 2007 21:15:24 GMT -7
You will need to rewire it, or get one of those impedance matchers that are sold by Weber. If you are only going to use the cab with the CG I'd just rewire it. The CG has 4 and 8 ohm output jacks.
|
|