|
Post by goodwater on Oct 5, 2010 19:21:14 GMT -7
just got my RX (original) today and it has a few issues
1-HI input doesn't work...simple enough, probably a bad jack
2-LO input works for the most part but can randomly drop signal and get very fuzzy and farty
3-same problem with LO input can also happen if I flip one of the switches but typically will only last 5-10 seconds
anybody else have this type thing happen?
|
|
|
Post by benttop (Steve) on Oct 5, 2010 21:09:53 GMT -7
Sounds to me like some oxidized components. Get some DeOxit and go through everything - spray all the jacks and work a plug in and out of there a bunch of times. Then pull each tube and spray the contacts and work them in and out of the socket a few times. If you hit every jack and every tube, then fire up the amp and still have problems, you need to ask the next question.
|
|
|
Post by goodwater on Oct 7, 2010 14:25:15 GMT -7
amp is on its way to the Dr for a checkup
|
|
|
Post by benttop (Steve) on Oct 7, 2010 18:30:05 GMT -7
Oh yeah, that's the sure-fire method!
|
|