|
Post by greenman on Jul 24, 2007 3:00:29 GMT -7
Due to my gross stupidity and a loose bias probe I've managed to fry the 470 Ohmm resistor that sits across two pins of the 6V6 socket. Replacing it isn't a major problem but can anyone tell me the wattage handling of this resistor? It looks like either a 1 or 2 Watt to me judging by it's size.
Regards
Andy
|
|
|
Post by DRZ on Jul 24, 2007 9:03:34 GMT -7
It is a Three watt Flame proof @ 470 ohms.
I would replace both, other sockets 470 if it were me.
Single source for the screen voltage that feeds both screen grid resistors in parallel.
Z
|
|
|
Post by rcrecelius on Jul 24, 2007 13:44:43 GMT -7
dont feel bad Greenman, several of us(myself included) have done that very same thing! Welcome to the forum
|
|
|
Post by greenman on Jul 25, 2007 23:18:43 GMT -7
Thanks for the replies, correct resistors ordered so she should be back up and singing soon.
Andy
|
|