|
Ohmage
Oct 3, 2007 7:14:40 GMT -7
Post by pigdig on Oct 3, 2007 7:14:40 GMT -7
Can any one out there tell me what ohmage output to use on my Maz SR 1-12 I can'r hear much difference between them so it's hard to know whether the speaker is wired 8-4 or 16 Ohms
|
|
|
Ohmage
Oct 3, 2007 10:38:03 GMT -7
Post by telejas on Oct 3, 2007 10:38:03 GMT -7
It all depends on you speakers, the amp can run at any ohms but the speakers are what determine what to run the amp at. The speaker should say on there somewhere what ohms it is.
If it's a stock G12H speaker, it's 16ohms.
Look at the speaker and go by that.... It will work for a while on the "wrong" ohms, but it'll eventually stress the tranny, push the tubes and cause problems in the long run.
EDIT: My G12H was a 16 ohm speaker
|
|
|
Ohmage
Oct 3, 2007 12:00:51 GMT -7
Post by aj1169 on Oct 3, 2007 12:00:51 GMT -7
My MAZ combo with the stock G12H was an 8 ohm load. It will say on the speaker.
|
|