|
Post by buckeye on Aug 23, 2021 3:41:35 GMT -7
Hi, My M12 Jewel light sometimes does come on when I hit the power switch. The amp works, just no light. If I flip the power switch a couple of times the light usually comes on. Any advice is appreciated. Thanks!
|
|
|
Post by heynewguy (Ol’ Bill) on Aug 23, 2021 3:55:09 GMT -7
I would suspect a loose bulb.
|
|
|
Post by buckeye on Aug 23, 2021 18:16:31 GMT -7
Bulb is secure. Took chassis out and made sure bulb was locked into socket. Problem still exists. Sprayed socket with DE-Oxit. No go.
|
|
|
Post by Chilly Gibbons (Todd T.) on Aug 23, 2021 18:30:49 GMT -7
Did you try another bulb? Sometimes the filament is loose inside and makes an intermittent connection.
|
|
|
Post by premiumplus (Dave) on Aug 24, 2021 3:43:01 GMT -7
Did you try another bulb? Sometimes the filament is loose inside and makes an intermittent connection. Exactly this. I've had it happen more than once.
|
|
|
Post by buckeye on Aug 24, 2021 4:01:04 GMT -7
Did you try another bulb? Sometimes the filament is loose inside and makes an intermittent connection. Exactly this. I've had it happen more than once. I ordered a couple from Amazon. We'll see.
|
|
|
Post by LT on Aug 24, 2021 8:33:54 GMT -7
I agree with the bulb recommendation. I've had auto bulbs that appeared to be perfectly fine, but were burned out.
Let us know the outcome!
|
|
|
Post by buckeye on Aug 28, 2021 6:22:29 GMT -7
Yep it was the bulb. All systems are a go!
|
|