|
Post by marko335 on Sept 28, 2020 6:51:03 GMT -7
The bulb in my front panel light (blue on the Z-LUX) appears to have burned out. It seems like replacing it should be simple. However, I have not been able to remove the bulb. i expected that if I pushed it in it would pop out; not the case. It is impossible to grab it with your fingers and seems to be designed that way. If anyone has figured out how to replace the bulb please pass solution to me. Thanks Marko335
|
|
|
Post by Jaguarguy (Mike) on Sept 28, 2020 7:40:37 GMT -7
Welcome to the Forum! A lot of good info and people here. Here is a link to another post on the topic. ztalk.proboards.com/thread/65340/power-light About halfway down there are a couple of different ways to grip the bulb. I believe Doc uses the same set-up as Fender so here's a video I found on You-Tube that shows one being fixed.
|
|
|
Post by premiumplus (Dave) on Sept 28, 2020 7:53:08 GMT -7
If you need a better grip on the bulb you can take a 3x3" piece of paper, wrap it around a pencil and push it over the lamp. That'll help get a grip. Putting one in, sometimes if it's tight and won't click in for you, I take a 1" piece of electrical tape and wrap it around the tip of the glass bulb. That'll get you the grip you need.
|
|