Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 6, 2020 12:36:31 GMT -7
Looking for one of these for my outdoor rig. Any suggestions?
|
|
|
Post by nicholas on Feb 16, 2020 16:33:28 GMT -7
For a two amp set up? One dry one wet? Maybe just a splitter before the delay? My Volante has a feature where you can pan the delay heads left or right. So I think you could run it in stereo and just push all the delay to one side or the other.
|
|
|
Post by goodez on Feb 17, 2020 8:19:26 GMT -7
I’m responding with a question to help myself better understand as well . I have a Z28/Z-Lux I’d like to run in stereo eventually. Couldn’t you just run a gig rig isolator under the board before the delay pedal to split the signal for wet/dry? Or is there a specific reason for wanting a stereo delay that splits a signal dry/wet? More fullness?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 17, 2020 9:49:44 GMT -7
Yeah--I think putting the ABY after the wireless and tuner and just running a dry out to the ZW Jr with all the dirt pedals and effects into the Lux may be the answer.
|
|
|
Post by goodez on Feb 17, 2020 10:26:04 GMT -7
Lehle: lehle.com/EN/productsalso has some great options with some of their pedals offering the impedance and ground splitter built into them that a lot of aby’s don’t. I’m not sure the Gigrig offers that. For instance I was running a 2x10 with a 1x12 cab but not sure that the impedance was correct. Or you could run one of Lehle’s stereo volume pedals but again idk if it has the impedance and ground split options built into the pedal. Anyone care to elaborate about the gigrig splitters or Lehle stereo volume pedals?
|
|
|
Post by nicholas on Feb 17, 2020 12:13:16 GMT -7
Yeah--I think putting the ABY after the wireless and tuner and just running a dry out to the ZW Jr with all the dirt pedals and effects into the Lux may be the answer. That's probably the easiest way. Especially if you already have a delay you like.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 17, 2020 13:55:51 GMT -7
Lehle: lehle.com/EN/productsalso has some great options with some of their pedals offering the impedance and ground splitter built into them that a lot of aby’s don’t. I’m not sure the Gigrig offers that. For instance I was running a 2x10 with a 1x12 cab but not sure that the impedance was correct. Or you could run one of Lehle’s stereo volume pedals but again idk if it has the impedance and ground split options built into the pedal. Anyone care to elaborate about the gigrig splitters or Lehle stereo volume pedals? The Gigrig ABY has phase correction and iso outputs, so no ground loops. Seems to work great.
|
|