|
Post by rnf321 on Dec 14, 2019 19:25:31 GMT -7
I have an early 2000 maz 38 Sr. I’m switching between a pedal steel and tele for a gig and am looking for help figuring the best way to get from one to the other without taking too long to get ready for the next tune when I want to switch. I also have a few pedals for each instrument and am currently plugging the steel into the high input and the tele into the low and using the tuner to mute the tele and the volume pedal to mute the steel. Unfortunately I would ideally prefer to use some of the effects pedals for both but end up with noticeable volume levels differences for each. Any suggestions? I could run both through all the pedals and switch off/on or choose preferred pedals and use both high and low inputs. Nice problem to have but would appreciate suggestions. Thanks
|
|
|
Post by Jaguarguy (Mike) on Dec 14, 2019 21:00:46 GMT -7
|
|
|
Post by j4gitr (John) on Dec 15, 2019 3:02:58 GMT -7
+1 to what Mike said. I use the Morley in a church situation when I switch between electric and acoustic using a Z-Plus. The Morley is right before the amp as each guitar runs through different pedals. A simple setup.
|
|
|
Post by rnf321 on Dec 16, 2019 10:01:44 GMT -7
Thanks for the info. It’s amazing how the product developers have an eye out for every potential need! Very helpful and appreciate all your feedback.
|
|