|
Post by coachmoe on Jun 17, 2019 16:19:16 GMT -7
Greetings! I have an old white BL that I have installed in my Maz 18 NR and I love it. I am thinking about putting a BL in my 2018 Princeton Reverb. It's a Limited edition amp and it has a Celestion Gold 12" speaker running at 8 ohms. I'm pretty sur that running the BL in the Fender will not be an issue but I just wanted to throw this out there to see if there are any possible concerns. Thanks in advance to anyone who can offer any assistance.
|
|
|
Post by purpletele on Jun 17, 2019 16:30:28 GMT -7
Greetings! I have an old white BL that I have installed in my Maz 18 NR and I love it. I am thinking about putting a BL in my 2018 Princeton Reverb. It's a Limited edition amp and it has a Celestion Gold 12" speaker running at 8 ohms. I'm pretty sur that running the BL in the Fender will not be an issue but I just wanted to throw this out there to see if there are any possible concerns. Thanks in advance to anyone who can offer any assistance. That should not be an issue at all.
|
|
|
Post by coachmoe on Jun 18, 2019 14:35:24 GMT -7
THANKS PURPLE!
|
|
|
Post by premiumplus (Dave) on Jun 19, 2019 21:15:56 GMT -7
Greetings! I have an old white BL that I have installed in my Maz 18 NR and I love it. I am thinking about putting a BL in my 2018 Princeton Reverb. It's a Limited edition amp and it has a Celestion Gold 12" speaker running at 8 ohms. I'm pretty sur that running the BL in the Fender will not be an issue but I just wanted to throw this out there to see if there are any possible concerns. Thanks in advance to anyone who can offer any assistance. Agree. I've got a Brake Lite in my '57 Deluxe Tweed and it works wonders. It really helps get the amp breathing without smokin' my ears.
|
|
|
Post by coachmoe on Jun 23, 2019 21:18:23 GMT -7
UPDATE
Mounted a BL in my Princeton Reverb Saturday for a gig that night.
Only issue I had was having to move the speaker 180 degrees to give the connecting wire enough room to reach the BL.
Used it on a gig with volume on 4 1/2 and two clicks on the BL. Seemed to work pretty well.
|
|