|
Post by stephny on May 16, 2019 9:14:36 GMT -7
New CURE owner. I want to run a TRIO+ Band Pedal into the efx loop "return" (for practice) but not have it fed from efx loop "send", but rather fed from ch. B on an A/B switch from the 1st position on my pedalboard. So do I need to worry about efx loop return levels in this set up as there is no level adjustment for the efx loop? And should I be aware of anything else?
Thanks
|
|
|
Post by LT on May 17, 2019 8:13:51 GMT -7
First off...welcome to the forum! Lots of great folks here.
I haven't tried what you're asking about, but since the Trio has a volume control, I would think you'd be ok. I'd start with it all the way down.
Anybody else tried this?
|
|
|
Post by premiumplus (Dave) on May 17, 2019 16:46:12 GMT -7
Yeah, I don't see why not, you're essentially just tapping into the power amplifier of the Cure. You will need a volume control on your effect, since you're plugging in after all the volume/tone circuits of the amplifier.
|
|
|
Post by stephny on May 21, 2019 18:13:39 GMT -7
Thanks for the info. My planned set up works fine... Love the new amp... Very impressed...
|
|
|
Post by LT on May 21, 2019 18:56:38 GMT -7
The Cure is a great amp from home to stage. It get's all my gigs where portability is paramount (in my case, hi-rise hotel's w elevators). Glad it's working out for you!
|
|