mazme
Junior Member
Posts: 67
|
Post by mazme on Mar 22, 2019 20:38:13 GMT -7
The reverb tank appears to be bad on my EZG 50, I know they don't make the same tank anymore, and I saw where Dr Z said to replace it with a MOD Tank, but the number he gave doesn't seem right, there is an added digit, more then ANY of the tanks that MOD sells has on it. The number he gives is P-PRMOD-8AB21A1B, Is the first 1 in that number incorrect ? because the only tank I found is P-RMOD-8AB2AIB ? I just want to make sure I order the exact, correct tank. Thank You
|
|
|
Post by Jaguarguy (Mike) on Mar 22, 2019 21:33:07 GMT -7
Here is Dr. Z speaking on the Maz reverb tank on another forum thread. Found a new supplier, MOD which are sold at Antique Electronics. P/N is P-RMOD-8AB2A1B. Very nice units. ( $16.50 ) They sound a little different, old one longer tail, new warmer tone. And the new one is built much better. Z (I just went to their site and here is a link to it. www.tubesandmore.com/products/reverb-tank-mod-8ab2a1b ) I've purchased two tanks from them with no issues.
|
|
mazme
Junior Member
Posts: 67
|
Post by mazme on Mar 23, 2019 13:14:28 GMT -7
JaguarGuy (Mike) If you keep it up I'm gonna have to buy you dinner and a beer lol. Thanks So much for the help, I really do appreciate it, I mean that.
|
|
|
Post by GT Roger on Mar 24, 2019 6:08:00 GMT -7
My reverb is working fine, but that's good info for all the EZG players, if there's fail. Thanks Mike!
|
|
|
Post by Jaguarguy (Mike) on Mar 24, 2019 6:47:42 GMT -7
JaguarGuy (Mike) If you keep it up I'm gonna have to buy you dinner and a beer lol. Thanks So much for the help, I really do appreciate it, I mean that. That's what Z-Bros are for! I've received more than my share of help here on the Forum.
|
|