|
Post by SonoftheBlues on Mar 1, 2019 1:48:17 GMT -7
Hi,
I'm not getting an answer on the support email so let's give it a try here. I'm looking to sell or trade my Z-Best. With my EZG I'm much more in need of a 4x10 I guess.
The metal corners on my Z-Best had a rough time during transports and I would to replace them. Can somebody tell me where I can buy them, preferably in Europe, or what size I have to look for?
Thank for reading J
|
|
|
Post by zpilot on Mar 1, 2019 4:39:54 GMT -7
|
|
|
Post by SonoftheBlues on Mar 1, 2019 7:57:44 GMT -7
Thanks a lot Z-Natic. So if I understand correctly I'm looking for ½“ radius corners?
|
|
|
Post by Jaguarguy (Mike) on Mar 1, 2019 8:27:55 GMT -7
BTW - Doc's website was hacked and there have been issues with messages getting back and forth. Try emailing drzrepairs@gmail.com
|
|
|
Post by zpilot on Mar 1, 2019 8:58:31 GMT -7
You can find these same corners sold at several sources and almost all of them will be for 1/2" radius which seems to be the standard for Fender type cabinets with 3/4" panels. Due to manufacturing variances I have occasionally had to form some corners a little bit with a mallet to get a "perfect" fit. Some cabinet edges are closer to 3/8"
|
|
|
Post by SonoftheBlues on Mar 3, 2019 6:21:01 GMT -7
Ok, thanks for all the help guys. Most important thing is that the screws lineup. If I have to form them a bit that's no problem.
|
|
|
Post by goodez on Mar 3, 2019 6:36:25 GMT -7
I got my corners on Amazon. The alignment of the screw holes weren’t spot on perfect but they were close enough for the install.
|
|