|
Post by jb1336 on Jun 13, 2015 10:54:26 GMT -7
Hi guys,
Just wondering about the AC out on a remedy, what can it power?
A pedal power supply?
Another amp?
Any noise issues when using it in either of these ways?
Any advice would be great!
James.
|
|
|
Post by nmz on Jun 13, 2015 11:11:32 GMT -7
Used mine for pedal power, reverb unit, and I think another amp at some point. No issues what so ever.
|
|
|
Post by jb1336 on Jun 13, 2015 12:28:03 GMT -7
Nice! All at once or where these separate occasions?
|
|
|
Post by Mark (Basement Enthusiast) on Jun 13, 2015 16:42:44 GMT -7
Good question! There's gotta be a max current rating on these, but I have no idea what it is. Seems that the Doc mentioned it sometime back, but I don't recall when or where.
|
|
|
Post by jb1336 on Jun 13, 2015 17:42:41 GMT -7
Yea seems odd, these ac Outlets seem to be popping up on a lot of power supplies to, with no mention of what they can safely power
|
|
|
Post by nmz on Jun 13, 2015 17:52:54 GMT -7
Nice! All at once or where these separate occasions? Ha, not at once but did use a power strip for another amp out of desperation with no problems!
|
|
|
Post by JSA61 on Jun 13, 2015 18:37:30 GMT -7
I use mine for my pedal Board and wireless. Works fine and quiet.
|
|
|
Post by jb1336 on Jun 14, 2015 4:59:42 GMT -7
Nice! Thanks for the help, getting a remedy at the end of the month want to run in stereo with a Maz 18 and use the AC to power a selection of pedals in housing between the amps
|
|
|
Post by KeithA on Jun 14, 2015 5:53:36 GMT -7
Nice! Thanks for the help, getting a remedy at the end of the month want to run in stereo with a Maz 18 and use the AC to power a selection of pedals in housing between the amps I assume you are getting a used or NOS model? I don't think the new, post-UL/CSA certified amps have the outlet anymore.
|
|
|
Post by Mark (Basement Enthusiast) on Jun 14, 2015 7:41:38 GMT -7
I don't think the new, post-UL/CSA certified amps have the outlet anymore. You are correct, sir. Newer models built with the PPI-MV & EQ-bypass have the UL/CSA back panel and do not have the power outlet. (Older ones with the PPI-MV & bypass retro-fitted still DO keep the outlet.)
|
|
|
Post by jb1336 on Jun 24, 2015 2:24:13 GMT -7
I don't think the new, post-UL/CSA certified amps have the outlet anymore. You are correct, sir. Newer models built with the PPI-MV & EQ-bypass have the UL/CSA back panel and do not have the power outlet. (Older ones with the PPI-MV & bypass retro-fitted still DO keep the outlet.) Bollocks! Shall be getting the master volume one Friday, guess I need more kettle leads...
|
|
|
Post by KeithA on Jun 24, 2015 2:52:42 GMT -7
You are correct, sir. Newer models built with the PPI-MV & EQ-bypass have the UL/CSA back panel and do not have the power outlet. (Older ones with the PPI-MV & bypass retro-fitted still DO keep the outlet.) Bollocks! Shall be getting the master volume one Friday, guess I need more kettle leads... Lol......it's no biggie, I'm sure, since I suspect you'll appreciate the master volume more than the outlet
|
|
|
Post by strat59 on Jun 25, 2015 7:24:41 GMT -7
If I remember correctly outlet is not recommended for powering another amp. Doc?
|
|