|
Post by humphreyaudio on Apr 26, 2006 5:20:33 GMT -7
I'd like to be a little more clear on exactly which position perform what main function.
I roll alot of tubes through my MAZ 18 and can always hear differences but I think it would help to know a little more about each position and what it basically does for the amp.
Any thoughts and comments would be appreciated.
Thanks,
MH
|
|
|
Post by billyguitar on Apr 27, 2006 15:42:39 GMT -7
Nobody's jumped in yet so I'll tell you what I know but I'm no expert. V1 is the first stage of the preamp, V2 drives the tone stack, V3 & V4 are for reverb drive and recovery and the one next to the power tubes is the phase inverter. If I'm wrong someone will let us know pretty quick.
|
|
|
Post by humphreyaudio on Apr 27, 2006 21:35:42 GMT -7
Nobody's jumped in yet so I'll tell you what I know but I'm no expert. V1 is the first stage of the preamp, V2 drives the tone stack, V3 & V4 are for reverb drive and recovery and the one next to the power tubes is the phase inverter. If I'm wrong someone will let us know pretty quick. Thanks Billy, I have V1 V2 and PI in mine. It's a MAZ jr 18 NR BTW. I appreciate the info. It'll help me to know more of what i'm doing when I'm experiementing with tubes. MH
|
|