|
Post by Stephen on Jun 19, 2013 19:07:50 GMT -7
I just got a brand new Maz 8 and the reverb is not working. Which tubes are reverb tubes? What should I check besides tubes?
|
|
|
Post by bryan0418 on Jun 19, 2013 19:51:24 GMT -7
|
|
|
Post by Stephen on Jun 19, 2013 21:33:32 GMT -7
I don't see anything about reverb under "Troubleshooting."
|
|
|
Post by DRZ on Jun 20, 2013 3:45:27 GMT -7
Make sure the RCA jacks from the reverb tub to the chassis are plugged all the way in and nice and tight.
DR.Z
|
|
|
Post by Stephen on Jun 20, 2013 6:40:22 GMT -7
Thank you, Dr Z. As it turns out, the plugs were tight. I tried changing tubes, but that did not help. As luck would have it, I had purchased a new reverb tank for my Maz 18, but never used because I exchanged for a NR model. It was the same one that was in my new Maz 8. When I plugged in the new tank, I had reverb.
|
|
|
Post by muZician on Jun 20, 2013 22:31:15 GMT -7
often the internal connection in the reverb tub brake: open the tub and look...easy repair. more rarely one the inductive couplers inside the tub is defective: forget a repair in this case.
|
|