|
Post by lovatomi on Sept 20, 2012 7:18:41 GMT -7
Hi, does anyone have information as to what the voltages are supposed to be at plates/cathodes on a Maz 18? Just want something I can compare to. Thanks!
|
|
|
Post by lovatomi on Sept 21, 2012 22:39:15 GMT -7
Here's what I got on mine. Used a variac to set wall voltage at exactly 120v AC.
V1 1,6-152.5 3,8-1.20 V2 1-122.5 3-0.8, 6-217, 8-122.5 V3 1-266 3-3.8 6-142, 8-2 v4 1,6-176 3,8-1.55 V5 1,6-208 3,8-50.6 V6 3-12.35 7-368, 9-357 V7 3-12.35 7-377, 9-356
How does that compare to others? Thanks!
|
|
|
Post by BritInvasion on Sept 23, 2012 4:43:51 GMT -7
I never had mine tested / measured. You might want to contact the guys at the shop or post this question in Myles section of "Ask the Experts".
|
|
|
Post by DRZ on Sept 23, 2012 12:35:51 GMT -7
Those voltages look typical. But Differances in EL-84 plate voltage scream mismatch.
DR.Z
|
|
|
Post by lovatomi on Sept 23, 2012 16:19:15 GMT -7
Awesome. Thanks for the response, Doc! I will take THAT as the final word. Was curious about the power tube plate voltages. Fairly new allegedly "matched" pair, why I oughta!
|
|
|
Post by BritInvasion on Sept 23, 2012 16:53:34 GMT -7
Dr. Z gives us the answer- doesn't get any better than that!
|
|