|
|
Post by jordanbunte on Dec 4, 2009 21:07:10 GMT -7
I haven't posted an updated shot of my pedalboard in quite a while. Here's the latest. All but the two red cables are PCNS and I'm very pleased with the quality. I thought I had a few shorting out, but it turns out my pedals just needed a good cleaning. It's quite a crude (homemade) board, but it works for my purposes. I'd rather spend my money on pedals and such than a fancy pedalboard. I may geek it up a bit and get a case for it or atleast make it tilt forwards at some point. It's fine for now though. I've got a few pedals that aren't on the board that occasionally show up. The only real pedal that I "need" is a tremolo. Also, sometimes I split the chain up and send the delays and reverb to the effects loop in my MAZ NR. I think it helps out a little bit, but I like how it sounds when I run everything through the front end as well. I'm getting pretty close to being done with the board. Once I get a tremolo, the Boss DD3 will come off since the Nova can handle all of my needs. The only other thing I am considering is changing out the Fat Boost 2 for a different clean boost. I've been looking at the Xotic RC and Flying Dragon. The Fat Boost 2 works great, but I'm not always looking to fatten up things. It seems as though the RC might be a little more transparent. Eh, I need to spend a bit more time with it before I decide. I'm sure it's a great pedal once you figure out all of the nuances. Thanks for looking! Chain is: IN---->EB Jr Volume---->Tuner---->Fulldrive 2 (18V)---->OCD V4 (18V)---->Fat Boost 2---->Nova Delay---->Boss DD3---->Malekko SC---->OUT Oh! I use the "artsy" box for picks, capo, etc.  |
|
|
|
Post by coldfingaz on Dec 13, 2009 13:01:38 GMT -7
PT Mini version 1....  |
|
|
|
Post by JasonM on Dec 13, 2009 13:30:34 GMT -7
 Already changed them around from last weeks post...  |
|
|
|
Post by JasonM on Dec 13, 2009 13:31:07 GMT -7
|
|
|
|
Post by Norrin Radd on Dec 13, 2009 13:33:34 GMT -7
Simply awesome and awesomely simple. Nice! |
|
|
|
Post by JasonM on Dec 13, 2009 13:48:23 GMT -7
Thanks Norrin Radd! I have had two different reverbs on there over the past week also but both were not what I was looking for so they went back.
|
|
|
|
Post by jhumber on Dec 18, 2009 16:28:41 GMT -7
Just added the Lovepedal Pickle Vibe (and noticed that this is my 2nd post on this page of this thread - must stop buying pedals!!)  Cheers Jordan |
|
|
|
Post by wally on Dec 19, 2009 8:39:52 GMT -7
love the pickle vibe and the clock is awesome...got to put one on my board
|
|
|
|
Post by wally on Dec 19, 2009 8:51:37 GMT -7
Standard "toys" ;D  this is perfect and all you need |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 19, 2009 12:51:01 GMT -7
 Pretty standard stuff. The one on the top left is an Orange Squeezer clone, built by our very own Eddie. |
|
|
|
Post by 6strang (aka Paul) on Dec 21, 2009 8:13:50 GMT -7
Here is the latest setup. Sorry for the camera phone low quality shot...  |
|
|
|
Post by Eddie on Dec 22, 2009 10:18:42 GMT -7
Pretty standard stuff. The one on the top left is an Orange Squeezer clone, built by our very own Eddie. I thought that looked familiar! :-) bTW, I have one of those Dano trems too. I like it quite a bit - how 'bout you? Peace, Eddie |
|
|
|
Post by Russell B on Dec 22, 2009 11:23:07 GMT -7
I love that Dragon!!!
|
|
|
|
Post by JumpMarine on Dec 24, 2009 18:42:14 GMT -7
 Here's my new board that the FedEx lady dropped off today on Christmas Eve. Looks like I need more pedals to fill up all of that space! |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 25, 2009 1:23:33 GMT -7
Wow nice MXR CC setting. Enough repeats??
|
|
|
|
Post by JumpMarine on Dec 25, 2009 10:10:28 GMT -7
LOL, Everything had been bumped around and I hadn't reset everything back to normal yet.
|
|
|
|
Post by brayks on Jan 3, 2010 7:15:26 GMT -7
 Work in process...... |
|
|
|
Post by John on Jan 3, 2010 7:22:27 GMT -7
I have an original Tycobrahe Octavia somewhere in the basement. Got it in about 1977.
I hear they're worth some money. THAT is the octive fuzz of fuzzes.
|
|
|
|
Post by jordanbunte on Jan 4, 2010 21:27:33 GMT -7
I think I'm finally done tweaking for a while. It's small (and homemade), but it packs plenty of power for my small gigs. I've got a few extra pedals in the drawer that I don't know what to do with (Boss DD3, Boss DD5 w/ tap, Boss RV5, Full Drive 2 (non-mosfet), Fat Boost 2, OCD V4, Line 6 MM4 w/ Keeley Mod, T-Rex Tonebug reverb, and something else...). Guess I need to move some of the "extras."  |
|
|
|
Post by Darkside on Jan 6, 2010 8:07:01 GMT -7
Removed the horribly worn carpet, fitted 3M Dual Lock, used 3 meters to do all the pedals! Recnt addition of a Lovepedal Les Lius, Great with Strats and superb with a Tele - very Keef!   |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 7, 2010 20:06:30 GMT -7
Pretty standard stuff. The one on the top left is an Orange Squeezer clone, built by our very own Eddie. I thought that looked familiar! :-) bTW, I have one of those Dano trems too. I like it quite a bit - how 'bout you? Peace, Eddie Man, I love that Dano trem. Totally underrated. I think I got it for something like $40, too. Of course, it figures that I wait a year plus to post a pic, and in the past month I've added a Malekko Chicklet and a Korg Pitch Black. Then I decided to move the compressor to the front, instead of putting it at the end. I guess I'll have to re-endure the humiliation of having my wife ask "Why are you taking pictures of a PEDALBOARD?!!?" |
|
|
|
Post by Darkside on Jan 10, 2010 17:40:29 GMT -7
[/quote] I guess I'll have to re-endure the humiliation of having my wife ask "Why are you taking pictures of a PEDALBOARD?!!?"[/quote] hehe! You too eh?  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 14, 2010 12:51:34 GMT -7
This is the smallest my board has been in ages, and I aim to keep it this way. I have a Custom Audio Electronics wah, a Demeter Tremulator, and a Bad Bob boost that will get some action occasionally, but most of the time it will just be these four pedals. MXR Carbon Copy < Durham Electronics Sex Drive < C&E Pedals FET Dream < Sonic Research Turbo Tuner The board is a Pedaltrain Mini. Everything is powered with a Visual Sound 1 Spot. Cables are George L's. K.I.S.S. ;D  |
|
|
|
Post by JasonM on Jan 14, 2010 15:10:46 GMT -7
^ Very nice, I like the clean and simple approach.
|
|
|
|
Post by Turtleheadblues on Jan 14, 2010 19:10:08 GMT -7
Wow lots of Lava on those boards. I am starting to feel welcome already !
Tony
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 14, 2010 23:27:21 GMT -7
Wow lots of Lava on those boards. I am starting to feel welcome already ! Tony I've had the same Lava Cables on my board for a few years now. After many pedal board changes they still all work! Thanks for the great product! |
|
|
|
Post by Turtleheadblues on Jan 15, 2010 6:59:23 GMT -7
Wow lots of Lava on those boards. I am starting to feel welcome already ! Tony I've had the same Lava Cables on my board for a few years now. After many pedal board changes they still all work! Thanks for the great product! Thank you for the support ! |
|
|
|
Post by digitalkettle on Jan 16, 2010 2:20:12 GMT -7
^ Very nice, I like the clean and simple approach. I ought to try that. Trying out some Suhr gain pedals...  Don't worry Tony, there's a Lava between board and amp  |
|
|
|
Post by brayks on Jan 17, 2010 22:36:13 GMT -7
OK, a lot of great stuff here. You all got me motivated to do something about my board (that just doesn't seem to be big enough). I got out my hammer and chisel and started new construction on a new board. Roughing is completed now on to finishing. I'm thinking of covering it with Fender Sea Foam Green Tolex with a couple of beige Rally Stripes that are bordered with either black or brown 1/8" piping. I'm trying to match my surf green Maz 18 combo and extension cab. Here's what I got so far. And the beat goes on....  |
|
|
|
Post by Eddie on Jan 17, 2010 23:34:50 GMT -7
Pretty cool so far, brayks!
I dig it!
Eddie
|
|
