|
Post by jordanbunte on Jul 30, 2009 6:49:19 GMT -7
I'm really excited. I should receive my EZG head and 410 cab today from UPS. Hopefully they haven't beat it up too badly.
Any precautions I should take before firing it up? I know to make sure the tubes are well seated in the sockets. Anything else?
Thanks, Jordan
|
|
ztonematt
Full Member
Bottom end tighter than your girlfriends...
Posts: 222
|
Post by ztonematt on Jul 30, 2009 6:56:45 GMT -7
have a change of shorts handy :-)
|
|
|
Post by Phil (aka Phil) on Jul 30, 2009 7:02:37 GMT -7
Just remember that the 4X10 is a 4 ohm cab, not 8. Start with the bass on "0", mids and treble at 12:00. I run the dwell at 9-10 o'clock and the reverb level pretty high, I think around 1 or 2 oclock. I run the pre maxed out and the volume at 10:00. Play the low "E" and ease the bass up until you like it. It'll start getting fat as soon as you turn the control; it'll get really fat soon after that. Past 10:00 with that cab it doesn't add a lot more bass. Remeber that the Z 10's take a long time and a lot of power to really break in. They're 70W each (280W cab) and the EZG only puts out 60 or so cranked. (and it's loud) Have fun!!!!!!!!!!
|
|
|
Post by dock66 on Jul 30, 2009 8:59:52 GMT -7
EZG and 4x10 are a great pair. LOUD as heck.
|
|
|
Post by jordanbunte on Jul 30, 2009 18:01:28 GMT -7
This thing is awesome! Can't wait to crank it a bit more this weekend.
Thanks for the warm welcome guys.
|
|
|
Post by jordanbunte on Jul 30, 2009 19:16:00 GMT -7
Here are a couple of quick pics....nothing special about the quality, but you get the idea. I'll be sure to take more pictures this weekend, and add them to the Z-Gallery. I need to mention that I got this from a fellow Z'er (crow). Chris was a great guy to deal with, and I hope he gets back into the Z club soon. Thanks again Chris!
|
|
|
Post by Chris NM on Aug 2, 2009 9:56:50 GMT -7
Thank you for the kind words Jordan and Harvey for the good wood. Might sound silly, but it means something to have it in good hands. It was more than just an amp.
Take care everybody and I won't be without a Z forever
|
|
|
Post by mfirst on Aug 2, 2009 16:47:47 GMT -7
Nice front on that EZG.
|
|
|
Post by jordanbunte on Aug 4, 2009 15:15:14 GMT -7
Thanks fellas. She's a real beauty!
|
|