|
Post by timsz on Oct 3, 2008 20:14:14 GMT -7
Hey guys.
I believe this to be my first post here. I've had quite the array of Z amps but have been waiting for the EZG50. It sounds like my dream amp. Question though... and this could trickle over to all the other heads that Z offers as well...
How would I go about connecting multiple cabinets up to the amp? It seems there's only one input for each speaker configuration. I think I was told about using a splitter but that just seems... not right to me.
I'm thinking of a 1x12 and a 2x10 or something similar... maybe a 2x12 and a 1x15 if I can make it all work. Does Z ever make the amps with multiple impedance inputs? Any suggestions?
|
|
janlf
Full Member
Moment's Notice
Posts: 173
|
Post by janlf on Oct 5, 2008 12:17:47 GMT -7
Hey guys. I believe this to be my first post here. I've had quite the array of Z amps but have been waiting for the EZG50. It sounds like my dream amp. Question though... and this could trickle over to all the other heads that Z offers as well... How would I go about connecting multiple cabinets up to the amp? It seems there's only one input for each speaker configuration. I think I was told about using a splitter but that just seems... not right to me. I'm thinking of a 1x12 and a 2x10 or something similar... maybe a 2x12 and a 1x15 if I can make it all work. Does Z ever make the amps with multiple impedance inputs? Any suggestions? Hi! Here's the answer to your prayers: procablesnsound.com/items/speaker-cables/power-y-adapter-70002-detail.htmJanLF
|
|
|
Post by mfirst on Oct 8, 2008 3:59:44 GMT -7
I'm planning on trying the evan with two cabs when it gets here. I'm thinking a 2x10 and a 2x12 may sound pretty good together. When I got my 2x12 from doc I asked him to wire it with a parallel speaker out. That way I can run to that cab then out to another cab. If one of your cabs is wired that way you wouldn't need the Y cable.
Welcome to the forum. Hang out here and read everything you can. You can learn a lot.
Matt
|
|