|
Post by tuxedotele on Mar 9, 2007 13:23:52 GMT -7
Just received (bought it used) a Maz 18, my first Dr Z. Amp sounds great everything working perfectly except reverb. I hear increased hiss as I turn the reverb control all the way clockwise, but no reverb. Yes, the plugs from the reverb are plugged into the amp. Where should I start?
|
|
|
Post by chipstar75 on Mar 9, 2007 19:51:25 GMT -7
do you have another amp with reverb? ...if you do, try plugging the leads from that reverb into your Z amp, . If this solves the problem, them its your reverb tub. They don't make em like they used to defenately applys to reverb tubs. they are very fragile. If the reverb still doesnt work, you may have a bad send or return tube (one, or both of the pre-amp tubes that drive the reverb.
|
|
|
Post by tuxedotele on Mar 10, 2007 21:00:41 GMT -7
Thanks, good idea. I will try that. Already ordered a full set of tubes, should be in first of the week.
|
|
|
Post by tuxedotele on Mar 13, 2007 10:24:36 GMT -7
Hooked up reverb leads from Fender amp I had. Reverb worked. Took out Accutronics tank and found broken wire, simple fix, thanks for suggestions.
|
|