|
Post by sonicboom on May 21, 2018 14:15:10 GMT -7
Hello!
I'm replacing the stock z speaker from my z28 1x10 combo. I cant remove one of the screws because the transformer is in between. Should I remove the chasis or is there another way of removing the speaker without removing the chasis?
thanks
|
|
|
Post by lowbudget on May 21, 2018 14:22:55 GMT -7
Try either a very short or offset screwdriver.
|
|
|
Post by headshrinker (Marc) on May 21, 2018 16:04:49 GMT -7
I've never been able to get a speaker out of one of those without removing the chassis. That was way easier than trying to use some weird screwdriver to try and get under it. It's also possible that even with an offset screwdriver you may not be able to get the screw out far enough to remove it.
|
|
|
Post by meanslide on May 21, 2018 16:40:00 GMT -7
Pull the chassis. Just don't touch anything INSIDE the chassis as you're pulling it out.
|
|