|
Post by baldeagle on Jan 28, 2018 22:22:08 GMT -7
The signal chain is:
8ohm spkr out to the In jack on the H&K Red Box
Red Box Thru jack to the input of the MicroMass
MicroMass spkr out to the internal spkr
Red Box XLR out to the PA mixing board.
When the Red Box is disconnected from the PA, the amp speaker plays at normal volume (dialed in via the attenuator). When the Red Box is connected, the amp speaker volume is barely audible, even with the attenuator off.
H&K have not responded to my Support email. I'm hoping someone here can tell me if this is normal behavior, incorrect chain, or a defective product. I strongly doubt it's defective...
|
|
|
Post by j4gitr (John) on Jan 29, 2018 3:26:42 GMT -7
Have you tried the red box without the micro mass? Micro mass without the red box? If they both function independently try switching positions in the chain. Sorry if I'm stating the obvious. I've never us d the red box, but I've had one for years, nor do I have a micro mass.
|
|
|
Post by zpilot on Jan 29, 2018 6:01:13 GMT -7
I don't think your problem is with the MicroMass. It seems to me to be a switching defect in the Red Box.
|
|