|
Post by thatstatuemoved on Mar 15, 2017 8:30:58 GMT -7
Can anyone tell me the orientation of the black and red reverb cables in the z-lux chassis? I unplugged mine and don't remember the order--thanks for any info---Jester
|
|
|
Post by budman2k on Mar 15, 2017 15:14:54 GMT -7
If you're looking from the back of the amp the red one should be farthest right.
|
|
|
Post by thatstatuemoved on Mar 15, 2017 18:14:36 GMT -7
thank you so much--Jester
|
|
|
Post by thatstatuemoved on Mar 16, 2017 21:21:01 GMT -7
very confused here--after looking at my reverb tank after I pulled it out of my head--I noticed the out on the tank has a red jack on it---well the black marked cable is plugged in here. The red marked cable is going into the in jack of the tank and this jack is white. Is this correct?? Thanks---Jester
|
|
|
Post by Jaguarguy (Mike) on Mar 17, 2017 8:47:14 GMT -7
Hey Jester,
Pics might help us see what you are talking about.
|
|
|
Post by thatstatuemoved on Mar 17, 2017 12:00:59 GMT -7
Okay--here are some pics hopefully . The output jack on tank is red abd the cable with the red dot is plugged in here. The other end of this cable is marked black on the end that goes into z-lux chassis. The input jack on the tank is marked white and that cable is marked red on the jack that goes into z-lux chassis. I am not sure where the cables marked red and black plug into which jack on the chassis. ( )( )( )( )
|
|
|
Post by thatstatuemoved on Mar 17, 2017 12:08:55 GMT -7
The plug with the red dot on it is marked black on the other end.
|
|