mjnn
New Member
Posts: 2
|
Post by mjnn on Aug 27, 2015 12:24:48 GMT -7
I have a 97 SRZ65RH I bought brand new back in the day. It was my main amp for the longest time. After years of road work bugs began coming up...and I need help.
1 the reverb developed a low hum that was over bearing...this is NOT a tube issue, or socket problem.
2 a wire broke loose and I do not know what pin to solder it back to.
3 since I stopped using it I've pulled the tubes for other amps. Now I am trying to get her running again. I believe V3 was the reverb driver and was an AT7 can someone tell me if that is correct or is it V4? I know it is one of them...pretty sure it is v3 Also...does anyone have a picture of the SRZ65RH board so I can see where this wire came detached?
And has anyone else had hum problem with the reverb and has fixed the problem...if so please pass that info on.
Thanks guys. I loved this amp...it's a shame the DR.Z site doesn't have more support material on it...not even a picture of an RH.
|
|
|
Post by Jaguarguy (Mike) on Aug 27, 2015 13:10:59 GMT -7
You really should contact the Z repair people. My experience with them has been great!
As for a manufacturer keeping the kind of info you are looking for on an amp that was basically discontinued more than 10 years ago don't think you'll find anyone keeping that info.
|
|
|
Post by drew on Aug 28, 2015 10:53:05 GMT -7
Interesting that two threads have been posted for the SRZ65RH amp. Like Mike mine has been trouble free and sounds great. Yes V3 is an AT7 tube. If you sent me your email I'll send you some pics I took of the amp chassis but not sure they will be close enough for your purposes. I pulled the chassis to put it into a head cab.
|
|
|
Post by muzacman02 "Jamie" on Oct 25, 2015 11:59:50 GMT -7
if you would like to sell? ..... Ill take it!!! Ha HA!!!!!!! I have a 96' and would be the perfect Match , Just kidding but if you do sell, Contact me ) I can send you a Gut Shot if you'd like but I can probably tell you what wire it is? If you give me some insight what where its feeding? MY SRZ had a slight hum and it was due to a Preamp tube and the Reverb Driver Tube, I also have Footswitchable reverb Thanks To the Good DRZ!!!! Are you sure its coming from the Reverb section???
|
|