|
Post by 6pack595 on Dec 14, 2014 12:57:34 GMT -7
I have a 4 ohm 1x15 cab and a 2x12 cab I can wire 16 ohms or 4 ohms. If I have 2 4ohm cabinets is there a way I can run them both with my EZG 50 head? Thank you.
|
|
|
Post by headshrinker (Marc) on Dec 14, 2014 13:32:30 GMT -7
First are you sure your 115 is 4 ohm. 4 ohm speakers are rather rare. If it is, you could get a series cable from Todd (pens). You would then have 8 ohms and would be good to go.
|
|
|
Post by Mark (Basement Enthusiast) on Dec 14, 2014 13:41:49 GMT -7
Yup, sure is. Look up Todd @ Pro Cables N Sound (aka. PCNS) and he can hook you up with a "series" cable--you could plug both 4-ohm cabs in series and use the 8-ohm output on your EZG.
|
|
|
Post by 6pack595 on Dec 14, 2014 15:16:58 GMT -7
I'm sure. It's a 120 watt Jenson MOD 4 ohm 15 inch speaker in a solid pind cabinet. My 2x12 cab has 2 8ohm alnico speakers. One silver bell and one blue. They are currently wired up 16 ohms but I'll wire them to 4 ohms if I can run both cabs with my Z. Thanks for your help guys!
|
|