|
Post by BradPaisleyFan (Pat) on Mar 16, 2014 16:46:55 GMT -7
Where do I get the cables that go from the speakers to the brake lite? Buy them from Dr Z? Humbucker? PCNS?
|
|
|
Post by benttop (Steve) on Mar 16, 2014 16:58:28 GMT -7
PCNS!
|
|
|
Post by Jaguarguy (Mike) on Mar 16, 2014 16:59:11 GMT -7
I agree with Steve - PCNS!
|
|
|
Post by BradPaisleyFan (Pat) on Mar 16, 2014 17:02:29 GMT -7
Is it just a regular speaker / instrument cable or is it one with the white and black into a 90* jack?
|
|
|
Post by benttop (Steve) on Mar 16, 2014 18:03:19 GMT -7
Is it just a regular speaker / instrument cable or is it one with the white and black into a 90* jack? Well first, speaker and instrument cables are entirely different. Do not attempt to use a guitar cord for a speaker cable, as you can cause all kinds of mischief to your amp. I'm not following your second question though - it seems to me all you need is a short speaker cable with a plug on both ends. It could be 90 degree or straight. I think this one should work: Straight Speaker CableWait a minute: Are you hooking in to a combo or a speaker cab? Might change the answer as I've been assuming a speaker cab.
|
|
|
Post by BradPaisleyFan (Pat) on Mar 16, 2014 19:16:44 GMT -7
Speaker cab...I was just thinking the speaker cable will have to be much shorter right? I plan to put a brake lite in all my cabs. I have 2 left and those are 2-12 open back cabs. I know that the cables are completely different, but they do look the same right? With the speaker cable being thinner? I was thinking 90 degrees because my amps are stored as close to the wall as possible. It would allow me to store them close to the wall.
Might seem like a simple question but I'm new to attenuators all together. Sorry guys.
|
|
|
Post by BritInvasion on Mar 16, 2014 20:05:20 GMT -7
|
|