|
Post by thatstatuemoved on Mar 13, 2014 11:53:04 GMT -7
Can anyone tell me where the bias adjustment knob is on the katie. Mine has not shown up yet, but I plan to retube when I get it and was just wondering where the bias pot is. Thanks for any advice and info.
|
|
|
Post by benttop (Steve) on Mar 13, 2014 16:47:17 GMT -7
If it's like the 6545 it's on the board - you have to pull the chassis to get to it. It's the only small pot on there, so you'll see it.
|
|
|
Post by thatstatuemoved on Mar 13, 2014 16:59:05 GMT -7
Thanks for the info Steve--I knew you would know--take care and thanks again--Jester
|
|
|
Post by thatstatuemoved on Apr 23, 2014 12:09:15 GMT -7
I found the bias pot on the kt-45--it is on the bottom of the chassis and I had to pull out the chassis to get to it just as others have said.
I have a peavey amp stand that I set the chassis on, hooked up my bias rite, hooked up a speaker and turned bias to 34ma. That amp stand really worked well to hold chassis.
|
|