|
Post by fishman on Apr 21, 2006 11:51:02 GMT -7
Does anyone use lock washers when mounting speakers....my speaker screws loosen up after a while and I was wondering if using lock washers would solve this problem...
|
|
|
Post by zdogma on Apr 21, 2006 14:11:10 GMT -7
Lock washers will work, but there often isn't enough clearance to fit them on (they catch on the edge of the speaker frame).
I usually use nylock (nylon lined) nuts to keep them from loosening up. Just bring your current ones to the hardware store, and get the same size in nylock. Might be a couple of bucks. You can also use blue threadlocking compound (just a drop) on the bolt, and reinstall the nuts.
|
|