|
Post by joemail75 on Feb 3, 2012 23:39:24 GMT -7
I know this questions has probably been asked a hundred times before so forgive me.
Remedy head to 2x10 cab. Any reason I can't use the non stand alone brake lite and just mount it inside my cab?
I can get a good deal on one but want to make sure I wont run into an issue using it on a non-combo amp. Seems like it should work fine to me.
thanks all!
|
|
|
Post by Eddie on Feb 4, 2012 1:59:04 GMT -7
Joe,
Yeah - no problem mounting it right inside the cab.
Enjoy, Eddie
|
|
|
Post by doctorice on Feb 4, 2012 7:28:51 GMT -7
A lot easier to mount in the cab than in the head
|
|
|
Post by benttop (Steve) on Feb 4, 2012 18:00:07 GMT -7
You can do it no problem, but you have to decide how you want to get the speaker signal from your amp to the brake lite, and from the brake lite to the speaker, since it is wired for the combo installation. If you're comfortable with soldering, I suggest you solder it in between the cab's input jack and the speaker. If you are NOT, then you might want to consider either having someone help you out with it, or use what it came with. It just gets a bit weird since you have cords going in and out of the cab that way.
|
|