|
Post by benttop (Steve) on Dec 17, 2006 11:39:19 GMT -7
I've found that I quite like my Stingray's volume control right at about 6 or maybe slightly higher - that's where the magic seems to be for me. So I use the Airbrake to tame things a bit. But even with 2db steps, one is not quite enough, and the next is way too much. So I'm thinking about moving the wipers inside closer together. Anyone done that, and have anything to say about it? I assume it will be trial and error.
|
|
|
Post by billyguitar on Dec 17, 2006 17:53:10 GMT -7
I haven't done that but have you tried a 5V4 or 5U4? They may reduce the volume enough that you might be able to get by on one click down.
|
|
|
Post by benttop (Steve) on Dec 17, 2006 20:10:19 GMT -7
Hadn't thought of that Billy. Hmmm... you may be right. I'll have to give that a whirl - less fiddling inside of things that way.
|
|
|
Post by Tom the Guitar Guy on Dec 18, 2006 8:46:30 GMT -7
Moving the slider (the first one) toward the speaker out jack will increase the attenuation, so my best educated guess would be that you need to move that first slider (since you're talking about the 2nd position) a little farther from the speaker out jack.
If I've got this wrong, please let me know.
Hope this helps.
tomtheguitarguy
|
|
|
Post by propellr on Dec 18, 2006 13:46:54 GMT -7
Hey! You just need a longer guitar cable... Just plug in FAR AWAY! Really, you could get some mileage out of just turning the amp away from you. Point it at the drummer-- he's DEAF anyway.
|
|
|
Post by steelguit on Apr 29, 2007 8:30:52 GMT -7
Moving the slider (the first one) toward the speaker out jack will increase the attenuation, so my best educated guess would be that you need to move that first slider (since you're talking about the 2nd position) a little farther from the speaker out jack. If I've got this wrong, please let me know. Hope this helps. tomtheguitarguy Help ! First slider THE FIRST ON THE LEFT (left to right) toward speakers out jack will increase 2nd pos. and ..... correct ??
|
|
|
Post by lowwatt on Jun 2, 2007 10:29:31 GMT -7
correct. you can't change increment 1, but the sliders are for positions 2, 3, and 4. Move towards the speaker out jack. retighten well.
|
|