Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 25, 2010 7:59:34 GMT -7
I'm about to order a ZVerb, but I'm hesitating just a bit pending answers to the following: does it have a footswitch? And how well does it get along with overdrive pedals going in the front of the amp? Thanks, as always, for all the great forum help!
|
|
|
Post by prspastor on Jul 25, 2010 18:41:00 GMT -7
Hi there, There is a jack in the back for attaching a footswitch. I'm not sure if they come with the footswitch though... You should be able to make your own fairly simply if it doesn't come with one. I bought mine used and it didn't have one.
I use a Xotic BB, Fulltone OCD, and Zendrive with my ZVerb and it sounds very, very good. Yes, I think that it gets along well with OD pedals. Now I put my pedals in front of the ZVerb, and then that into the front of the amp. I don't typically use the ZVerb in an effects loop.
You'll be pleased! Enjoy!
|
|
|
Post by asattwanger on Jul 25, 2010 19:00:59 GMT -7
Pedals set at unity no issue. Pedals set to boost there is some issue of more signal more verb. If your a boost guy I would suggest putting it in a effects loop or place it on the floor as a pedal and have your boost after the Z-verb.
Yeah man it comes with a foot switch.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 25, 2010 21:01:48 GMT -7
Thanks, guys!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 26, 2010 21:31:01 GMT -7
ZVerb ordered (red!)--can't wait to wallow in its spacey goodness.
|
|