|
Post by ormond on Jun 24, 2010 12:41:51 GMT -7
I adjusted the innards. The first time I did there was no sound on setting 4. Then I moved the sliders around and now there is sound on 4 but not on 3. All the solder connections and such are fine - am I grounding something out when I reposition the sliders? Surely someone else has had this happen and solved the problem.
|
|
|
Post by bluzman on Jul 1, 2010 19:44:58 GMT -7
I haven't adjusted mine but I do know you have to be careful with the slider connections as I have adjusted Resistors like that in charging systems.
Make sure the nub on the slider is tight to the where the contact needs to be made and that the slider is facing the proper direction for a good connection.
|
|